Chapter 3 – Unsolicited AT Result Codes

Call Answered +WANS

Description: This response indicates that a voice call has been answered.

Values:

<call type>

 

 

0: incoming call

 

 

1: outgoing call answered by other party (only available on networks supporting

 

answering supervision for payphone applications)

Syntax:

Response syntax: +WANS:<call type>

 

Command

Possible Responses

 

ATA

+RING

 

 

OK

 

 

+WANS:0

 

 

Note: Incoming call answered

 

 

+WCNT:3

Call Connected +WCNT

Description: This unsolicited command indicates that an incoming or outgoing voice call has been connected into a traffic channel state. If the service option is not available, +WCNT: will output “NULL”.

Values:

<so> Service option of call.

 

 

Speech: 3, 17, 32768

 

 

Loopback: 2, 9, 55

 

 

OTAPA: 18, 19

 

 

Position Determination: 35, 36

Syntax:

Response syntax: +WCNT: <so>

 

 

Command

Possible Responses

 

 

 

 

ATD18005551212;

OK

 

 

+WORG:18005551212

 

 

+WCNT:3

 

 

Note: Call Connected with service option 3

Call Ended +WEND

Description: This response indicates that a voice call or attempt to establish a voice call has ended.

Values (for WISMO Quik 24xx) : <reason>

0: Phone is offline

20: Phone is CDMA locked

21: Phone has no service

22: Call Faded/Dropped

23: Received Intercept from Base Station

24: Received Reorder from Base Station

25: Received a Release from Base Station (This is a normal call termination).

26: Service Option rejected by Base Station

27: Received Incoming Call

28: Received an alert stop from Base Station

29: Software ended the call (Normal release).

30: Received End Activation – OTASP calls only.

31: Internal Software aborted the origination/call.

32: Maximum Access probes exhausted (The modem failed to contact the Base Station)

34: RUIM not present

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C

20

Page 20
Image 20
Multi-Tech Systems CDMA Wireless Modem manual Call Answered +WANS, Call Connected +WCNT, Call Ended +WEND, Values Call type