Multi-Tech Systems CDMA Wireless Modem Reset TCP Protocol Statistics $QCTCPR , Set Data Service Option $QCSO , Clear Mobile Error Log $QCCLR

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 154
Reset TCP Protocol Statistics $QCTCPR
Description: This command is used to zero all of the TCP statistics counters.
Syntax: Command syntax: AT$QCTCPR
Command Possible Responses
AT$QCTCPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCTCPR
Note: Reset TCP statistics counter
$QCTCPR:
OK
Note: Command is valid
Set Data Service Option $QCSO
Description: This command is used to Set Data Service Option number set; saves to non-volatile
memory.
Values: <Val>
0 : pre-707 SO numbers (RS 1: Async 4, G3 Fax 5, packet 7; RS 2: Async 12, G3 Fax
13, packet 15)
1 : proprietary SO numbers (RS 1: Async 4, G3 Fax 5, packet 7; RS 2: Async 0x8021,
G3 Fax 0x8022, packet 0x8020)
2 : IS-707 SO numbers (RS 1: Async 0x1004, G3 Fax 0x1005, packet 0x1007; RS 2:
Async 12, G3 Fax 13, packet 15)
Syntax: Command syntax: AT$QCSO =<Val>
Command Possible Responses
AT$QCSO?
Note: Display the current setting
$QCSO: 2
OK
Note: Command is valid
AT$QCSO =?
Note: Display the range of values
$QCSO: (0-2)
OK
Note: Command is valid
AT$QCSO =1
Note: Set proprietary SO
numbers.
OK
Note: Command is valid
Clear Mobile Error Log $QCCLR
Description: This command is used to clear the mobile error log.
Syntax: Command syntax: AT$QCCLR
Command Possible Responses
AT$QCCLR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCCLR
Note: Clear the mobile error log
$QCCLR:
OK
Note: Command is valid