Multi-Tech Systems CDMA Wireless Modem manual Command syntax AT+WSOS=flag, At+Wsos?, At+Wsos=?

Chapter 6 – Network Service Commands

Emergency Mode +WSOS

Description: In the event of an emergency call, the modem will automatically put itself into emergency mode. After the call has ended and/or emergency mode is no longer desired, this command must be sent to exit the modem out of emergency mode.

Note: Changing the mode preference using +COPS while emergency mode is in effect will exit the modem out of Emergency Mode.

Note: For RUIM capable modems, the emergency numbers 110, 112, 119, and 120 are also supported by the modem software in addition to 911.

Values:	The parameters values are the following ones:
	<flag>
	0: Exit Emergency Mode
	1: Manually enter Emergency Mode (not supported)
	Note: 1: AT+WSOS by itself is a short-hand equivalent to AT+WSOS=0.
Syntax:	Command syntax: AT+WSOS=<flag>
	Command	Possible Responses
	AT+WSOS?	+WSOS: 1
	Note: Ask for current Emergency Mode status	OK
	AT+WSOS=?	+WSOS: (0-0)
		OK
	AT+WSOS	OK
	Note: Exit Emergency Mode.	+WSOS:0
	Note2: This is the same as AT+WSOS=0	Note: Unsolicited +WSOS result confirms Emergency
		Mode exit
	AT+WSOS=0	OK
	Note: Exit Emergency Mode.	+WSOS:0
		Note: Unsolicited +WSOS result confirms Emergency
		Mode exit
	AT+WSOS=1	ERROR
	Note: Try to manually enter Emergency Mode.	Note: This is not allowed. Emergency Mode will only be
	This is not allowed.	entered as a result of an emergency call
	ATD911;	+WSOS: 1
	Note: Emergency Mode entered as the result	+WORG: 911
	of an emergency call
	AT+COPS=0,0	+WSOS: 0
	Note: Changing the mode preference while in	+COPS: 0,0
	Emergency Mode, will result in Emergency	Note: An unsolicited response for both +WSOS and
	Mode being exited	+COPS are returned when mode preference is changed
		while in Emergency Mode.

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 49