Multi-Tech Systems CDMA Wireless Modem manual Set MN-HA Shared Secrets $QCMIPMHSS

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation

Set MN-HA Shared Secrets $QCMIPMHSS

Description: This command is used to set MN-HA shared secrets for the currently active profile.

Values:	<String>The shared secret text to be stored.
	<Val>
	0: Do not commit to NV
	1: Commit to NV
	Note 1: Double quotes are only required if the string contains a command.
	Note 2: If the value provisioned is not committed to NV, the temporary value will be deleted
	at the end of the following call if $QCMIPP is called.
Syntax:	Command syntax: AT$QCMIPMHSS =<String>,<Val>
	Command	Possible Responses
	AT$QCMIPMHSS?	$QCMIPMHSS: Set
	Note: Display the current setting	OK
		Note: Command is valid
	AT$QCMIPMHSS=?	$QCMIPMHSS: (20,21,23-7E),(0-1)
	Note: Display the range of values	OK
		Note: Command is valid
	AT$QCMIPMHSS=20,0	OK
	Note: Set value to 20, 0	Note: Command is valid

Set MN-AAA Shared Secrets $QCMIPMASSX

Description: This command is used to set MN-AAA shared secret for the currently active profile in HEX.

Values:	<HEX> Hex value from 0 to FFFFFFFF
	<Val>
	0: Do not commit to NV
	1: Commit to NV
	Note: If the value provisioned is not committed to NV, the temporary value will be deleted at
	the end of the following call if $QCMIPP is called.
Syntax:	Command syntax: AT$QCMIPMASSX =<HEX>,<Val>
	Command	Possible Responses
	AT$QCMIPMASSX?	$QCMIPMASSX: Set
	Note: Display the current setting	OK
		Note: Command is valid
	AT$QCMIPMASSX=?	$QCMIPMASSX: (0-FFFFFFFF),(0-1)
	Note: Display the range of values	OK
		Note: Command is valid
	AT$QCMIPMASSX=FF,0	OK
	Note: Set value to 0xFF, but not commit	Note: Command is valid

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 162