Multi-Tech Systems CDMA Wireless Modem SIM ToolKit Set Facilities (+STSF)

Chapter 15 – SIM TOOLKIT
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 114
SIM ToolKit Set Facilities (+STSF)
Description: This command allows SIM ToolKit facilities to be activated, deactivated or configured.
Values: <mode>
0: Deactivates the SIM Toolkit functionalities.
1: Activates the SIM Toolkit functionalities.
2: Configures the SIM Toolkit functionalities.
<Config>
(160060C01F . 5FFFFFFF7F) (hex format)
<Timeout>
1-255: Timeout for user responses (multiple of 10 seconds).
<Autoresponse>
0: Automatic response is not activated
1: Automatic response is activated
The activation or deactivation of the SIM Toolkit functionalities requires the use of the
+CFUN (Set phone functionality) command to reset the product (this operation is not
necessary if PIN is not entered yet).
The <Config> parameter gives the coding of the TERMINAL PROFILE, precisely the list of
SIM Application Toolkit facilities that are supported by the customer application.
The <Timeout> parameter (multiple of 10 seconds) sets the maximum time the user has for
reacting (to select an item, to input a text, etc).
When the <Autoresponse> is activated, the +STIN indication for Play Tone (5), Refresh (7),
Send SS (8), Send SMS (9) or Send USSD (10) is automatically followed by the
corresponding +STGI response.
Note: Some bits are related to the product only and not to the customer application. The
product automatically sets these bits to either 0 or 1 whatever the user enters with the
+STSF command.
Each facility is coded on 1 bit:
• bit = 1: facility is supported by the customer application.
• bit = 0: facility is not supported by the customer application.
Only the first five bytes of the TERMINAL PROFILE (Class 2) can be configured, the other
are set to 0. (See structure of TERMINAL PROFILE in APPENDIX C)
Syntax: Command syntax: AT+STSF=<mode>[,<config>][,<Timeout>][,<AutoResponse>]
Command Possible Responses
AT+STSF=<Mode>[,<Config>][,
<Timeout>][,<AutoResponse>]
OK
+CME ERROR: <err>
AT+STSF? +STSF:
<Mode>,<Config>,<Timeout>,<Autoresponse>