Multi-Tech Systems CDMA Wireless Modem manual Set Reverse Tunneling $QCMIPRT

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation

Set Reverse Tunneling $QCMIPRT

Description: This command is used to set the reverse tunneling currently active profile.

Values:	<Val1>
	0: Do not request reverse tunneling
	1: Request reverse tunneling
	<Val2>
	0: Do not commit to NV
	1: Commit to NV
	Note: If the value provisioned is not committed to NV, the temporary value will be deleted at
	the end of the following call if $QCMIPP is called.
Syntax:	Command syntax: AT$QCMIPRT=<Val1>, <Val2>
	Command	Possible Responses
	AT$QCMIPRT?	$QCMIPRT: 1,1
	Note: Display the current setting	OK
		Note: Command is valid
	AT$QCMIPRT=?	$QCMIPRT: (0-1), (0-1)
	Note: Display the range of values	OK
		Note: Command is valid
	AT$QCMIPRT=1,1	OK
	Note: Set value to 1 and commit	Note: Command is valid

Set MN-AAA Shared Secrets $QCMIPMASS

Description: This command is used to set MN-AAA shared secrets for the currently active profile.

Values:	<String> The shared secret text to be stored.
	<Val>
	0: Do not commit to NV
	1: Commit to NV
	Note 1: Double quotes are only required if the string contains a command.
	Note 2: If the value provisioned is not committed to NV, the temporary value will be deleted
	at the end of the following call if $QCMIPP is called.
Syntax:	Command syntax: AT$QCMIPMASS =<String>,<Val>
	Command	Possible Responses
	AT$QCMIPMASS?	$QCMIPMASS: Set
	Note: Display the current setting	OK
		Note: Command is valid
	AT$QCMIPMASS=?	$QCMIPMASS: (20,21,23-7E),(0-1)
	Note: Display the range of accepted	OK
	character values.	Note: ASCII hexadecimal character range supported by this
		command. (All non-control codes.)
	AT$QCMIPMASS= my5ecretC0de,0	OK
	Note: Non-committed value set	Note: MN-AAA is now: my5ecretC0de

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 161