Multi-Tech Systems CDMA Wireless Modem manual Access Overload Class +WAOC, Slot Cycle Index +WSCI

Chapter 16 – Provisioning AT Commands

Access Overload Class +WAOC

Description: This command is used to set the Access Overload Class.

Values:	<number>
	Access overload value range – 0 to 15.
Syntax:	Command syntax: AT+WAOC=<number>
	Command	Possible Responses
	AT+WAOC?	+WAOC: 5
	Note: Get current Access Overload Class	OK
	AT+WAOC=7	OK
	Note: Set Access Overload Class to 7

Slot Cycle Index +WSCI

Description: This command is used to set the slot cycle index.

Values:	<number>
	Slot cycle index, ranges from 0 to 7.
Syntax:	Command syntax: AT+WSCI=<number>
	Command	Possible Responses
	AT+WSCI?	+WSCI: 2
	Note: Read the current slot cycle index	OK
	AT+WSCI=1	OK
	Note: Set the slot cycle index

Primary Browser Gateway +WBGP

Description: This command is used to set the primary browser gateway IP address (Ipv4). If a browser is not natively supported by the modem, this command will return ERROR.

Values: <num> 0-255

Syntax: Command syntax: AT+WBGP=<num>,<num>,<num>,<num>

Command	Possible Responses
AT+WBGP?	+WBGP: 127,0,0,1
Note: Get current gateway	OK
AT+WBGP=255,255,255,0	OK
Note: Set primary gateway to 255.255.255.0

Secondary Browser Gateway +WBGS

Description: This command is used to set the secondary browser gateway IP address (Ipv4). If a browser is not natively supported by the modem, this command will return ERROR.

Values:	<num>
	0-255
Syntax:	Command syntax: AT+WBGS=< num >,< num >,< num >,< num >
	Command	Possible Responses
	AT+WBGS?	+WBGS: 127,0,0,1
	Note: Get current primary gateway	OK
	AT+WBGS=255,21,255,0	OK
	Note: Set secondary gateway to 255.21.255.0
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C		126