Multi-Tech Systems CDMA Wireless Modem manual Transition to Diagnostics Monitor $QCDMG

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation

CHAPTER 19 - QUALCOMM DEFINED AT COMMANDS FOR

CDMA OPERATION

This section contains AT commands that are specified and developed by Qualcomm.

Note: Mobile IP related AT commands work only on the modems that supported the MIP features.

Transition to Diagnostics Monitor $QCDMG

Description: This command returns “OK” and then transitions the phone serial port to DM mode. DM mode runs at 38.4 Kbps and uses a proprietary half-duplex protocol.

Syntax:	Command syntax: AT$QCDMG
	Command	Possible Responses
	AT$QCDMG	OK
	Note: Transition to DM port	Note: Command is valid

Quick Net Connect $QCQNC

Description: This command is used to enable or disable the Quick Net Connect (QNC) feature.

Values:	<Val>
	0: Disable QNC capability. This means that packet Originations will use the Packet Data
	Service Option number.
	1: Enable QNC capability. This means that Packet Originations will use the Async Data
	Service Option number.
Syntax:	Command syntax: AT$QCQNC=<Val>
	Command	Possible Responses
	AT$QCQNC?	$QCQNC: 0
	Note: Display the current setting	OK
		Note: Command is valid
	AT$QCQNC=?	$QCQNC: (0-1)
	Note: Display the range of values	OK
		Note: Command is valid
	AT$QCQNC=1	OK
	Note: Enable QNC compatibility	Note: Command is valid

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 150