Multi-Tech Systems CDMA Wireless Modem manual Error Codes, SIM ToolKit Indication +STIN

Chapter 15 – SIM TOOLKIT

Error Codes

+CME ERROR: 3 Operation not allowed . This error is returned when a wrong parameter is entered.

Example:
AT+CMEE=1	Enable the reporting of mobile equipment errors
OK
AT+WIND=15	Set indications
OK
AT+CPAS	Query ME Status
+CPAS: 0	ME is ready.
OK
AT+STSF=?	Test command SIM ToolKit Set Facilities
+STSF: (0-2), (160060C01F . 5FFFFFFF7F),(1-255)
OK
AT+STSF?
+STSF: 0,”160060C000”,3	No activation of SIM ToolKit functionality
OK
AT+STSF=2,”5FFFFFFF7F”	Set all SIM ToolKit facilities (class 3).
OK
AT+STSF=3	Syntax Error
+CME ERROR: 3
AT+STSF=1	Activation of SIM ToolKit functionality
OK
AT+CFUN=1	Reboot Software.
OK
AT+CPIN?	Is the ME requiring a password?
+CPIN: SIM PIN	Yes, SIM PIN required
AT+CPIN=0000
OK PIN Ok
+WIND: 4	Init phase is complete
AT+STSF?
+STSF: 1,”5FFFFFFF7F”,3	SIM ToolKit functionality activated with all facilities
OK

SIM ToolKit Indication (+STIN)

Unsolicited Result:

In order to allow the customer application to identify the pro-active command sent via SIM ToolKit, a mechanism of unsolicited SIM ToolKit indications (+STIN) is implemented.

Syntax: +STIN: <CmdType>

Option: <CmdType>

0: Indicates that a .Setup Menu. Pro-active command has been sent from the SIM.

1: Indicates that a .Display Text. Pro-active command has been sent from the SIM.

2: Indicates that a .Get Inkey. Pro-active command has been sent from the SIM.

3: Indicates that a .Get Input. Pro-active command has been sent from the SIM.

4: Indicates that a .Setup Call. Pro-active command has been sent from the SIM.

5: Indicates that a .Play Tone. Pro-active command has been sent from the SIM. (*)

6: Indicates that a .Sel Item. Pro-active command has been sent from the SIM.

7: Indicates that a .Refresh. pro-active command has been sent from the SIM. (*)

9: Indicates that a .Send SMS. Pro-active command has been sent from the SIM. (*)

11 : Indicates that a SETUP EVENT LIST. Pro-active command has been sent from the SIM.

98 : Indicates the timeout when no response from user.

99: Indicates that a .End Session. Has been sent from the SIM.

(*)if the automatic response parameter is activated, this indication is followed by the corresponding +STGI response.

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 115