Multi-Tech Systems CDMA Wireless Modem manual Change Default Melody +WCDM, Software Version +WSSW

Chapter 14 – Specific AT Commands

Change Default Melody +WCDM

Description: This specific command allows a manufacturer specific melody to be selected. This default melody will be played for any new incoming voice call, either on the buzzer or on the speaker. If melody 0 is selected, no melody will be played.

	Note: Selection of the player will have effect on the setting of the WCDP command.
Values:	<melody>
	0: No melody (default)
	1…10: Melody 1 to 10
	<player>
	0: Melody n°<melody> will be played on the buzzer for any new incoming voice call.
	(default)
	1: Melody n°<melody> will be played on the speaker for any new incoming voice call.
Syntax:	Command syntax: AT+WCDM=<melody>,<player>
	Command	Possible Responses
	AT+WCDM=0	OK
	Note: Select no melody
	AT+WCDM=5	OK
	Note: Select melody n°5
	AT+WCDM?	+WCDM: 5,0
	Note: Indicate the current melody	OK
		Note: Melody n°5 is currently selected, and the buzzer is
		selected to play it.
		RING
		Note: An incoming call occurs, and the melody n°5 is
		played on the buzzer.
	AT+WCDM=,1	OK
	Note: Select the speaker to play
	the melody on.
	AT+WCDM?	+WCDM: 5,1
		OK
		Note: Now the speaker is selected to play the melody if
		an incoming call occurs.

Software Version +WSSW

Description: This command displays the internal software version.

Syntax: Command syntax: AT+WSSW

Command	Possible Responses
AT+WSSW	+WSSW: WQ1.6
Note: Get Software	OK
version	Note: internal software information

Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 102