Nortel Networks VT100 manual Como cell branches

IVR 2.0/I call flow interface 4-9

Note: You must enter the output buffers in the same order they will be used by the TRS process.

If your application uses more than 10 output buffers, string COMO cells together until you have enough buffers. Connect the input branch of each subsequent COMO cells to the “MORE DATA” branch of the previous COMO cell.

COMO cell branches

As shown in Figure 4-5 on page 4-9, the COMO cell has several branches.

Figure 4-5

COMO cell

Table 4-1 describes each branch of the COMO cell.l

Table 4-1

Branches of the COMO cell

Branch	Reason the branch would be taken
ERROR	Any problem with any part the host transaction will
	cause the application to take the error branch.
TIMEOUT	The transaction took more than its allowed time as
	specified in the COMI cell.
NOT READY	The transaction did not complete and Blocking was
	set to “No”
END OF DATA	The transaction successfully completed

Meridian IVR VT100 Gateway Development Guide Product release 2.0/I