Oki 5400 manual Signal tones

Models: 5400

1 104
Download 104 pages 37.26 Kb
Page 26
Image 26

Using this key prints out confidential fax messages received into mail boxes in the memory of your fax machine after entering the correct password.

When no messages are in memory, using this key prints a cleaning page to clear accumulated toner from your fax machines image drum.

Signal tones

Your fax machine emits a number of sounds to inform you of specific conditions.

Key Select Tone: This is a short beep that occurs each time you press a key.

Error Tones: If you press a wrong or inappropriate key, your fax machine will emit three short beeps. If your fax machine experiences a problem during communications, it will emit three long beeps. Press the Stop key to turn the error tone off, then print a Message Confirmation Report to check the source of the problem by pressing the Copy key twice with no documents loaded.

Voice Request Tone: During a fax session, either you or the person at the remote fax machine may initiate a voice request. When the person at the remote fax machine either initiates or answers your voice request, your fax machine emits a repetitive warbling sound.

End of Session Tone: At the end of every successful fax session, your fax machine emits a short beep to inform you that there were no errors or problems in the communication.

Off-Hook Alarm Tone: If your fax machine is equipped with a handset, and if the handset is left off the hook, your fax machine will emit an intermittent warbling sound. To turn off the sound, hang up the handset or press the Stop key.

18

User’s Guide

Page 26
Image 26
Oki 5400 manual Signal tones