Setting fax machine identification
1.Press the Select Function key.
2.Press the 9/User Program One Touch key. The display shows 1:FUNC. PROGRAMMING.
3.On the numeric keypad, press 4. The display shows 4:SYSTEM
DATA PRG.
4.Press the YES key. The display shows NO=<TSI/CSI>, ID=<SENDER ID>.
5.After the display clears, enter the full telephone number of your fax machine using the numeric keypad.
Note:
Use the Hyphen key to enter a “+” character before the number, which is the generally recognised method of indicating the international access code before the country dialling code. The Space One Touch key is used to enter spaces in a number.
6.Press the Start key to save your entry.
7.Enter your Sender ID. This is a descriptive title up to 32 characters long. Refer to the instructions below.
To Do This | Use |
|
|
Enter numbers | Numeric keypad |
|
|
Enter spaces | Space One Touch key |
|
|
Enter hyphens | Hyphen key |
|
|
Enter alphabet characters | Locate the character you want on the numeric keypad. |
| Press that key repeatedly until the character appears. |
|
|
Enter a unique character. | Press the 0/Unique key repeatedly until the character |
| you want appears. The following characters are |
| available: ! # & ‘ ( ) * + , |
| æ å ø. |
|
|
Enter next character | Press the NO key to move the cursor to the next |
| position for the next character. |
|
|
Move the cursor to make corrections | YES and NO keys. |
|
|
English
8.Press the Start key to save your entry. The display shows NO=<CALL BACK NO.>.
9.After the display clears, use the numeric keypad to enter the telephone number you want to use for call back messages. Enter up to 20 characters.
Installation | 31 |
