LAN Print T.O.

User Function 82

It is impossible to judge whether printing data is not being transmitted due to network delay or the end of the data stream. This time-out configuration allows the device to cancel a print job when no printing data can be found after a specified time has elapsed since the last data was submitted.

Do not change the default configuration unless it is absolutely necessary.

Settings are: 5 sec., 30 sec., 5 min.

Default Setting is: 30 sec.

POP Interval

User Function 83

Use this to set the interval between POP receptions.

If daily is selected, four slots (fields) are available for programming.

·Each slot (field) can can be programmed with a different time

or

·Times can be programmed into the slots (beginning with Field 1) and the remaining slots can be left blank.

Available settings are

Off, 1 min., 5 min., 10 min., 30 min., 60 min., Daily

The default setting is 5 minutes.

28 OKIFAX 5780/5980

Page 28
Image 28
Oki 5780 manual LAN Print T.O User Function, POP Interval User Function