When you start OKIVIEW 32, you will see a list of the | Internet | |
Network Cards connected to the printers and facsimiles. | Host Name | |
Check the MAC addresses of the printers and facsimiles to | ||
identify the Network Card you want to configure. | ||
DSN | ||
| ||
The Network Card Report provides the MAC address as | DNS (Primary/Secondary) | |
SMTP | ||
! explained earlier. | ||
POP3 | ||
Next, select the Network Card you wish to configure. | ||
Factory Defaults, Reset Device | ||
Then go to MENU, then Setup, then Device Setup. | ||
You can use OKIVIEW 32 to adjust the settings for User | ||
You can change the following settings. | ||
! Function 98, Network Settings. | ||
Status | ||
See the OKILAN 7100e+ User’s Guide, “OKILAN | ||
Name | ||
Configuration, Setting Up the OKILAN 7100e+ Using | ||
Location | ||
OKIVIEW 32” or the OKIVIEW 32 | ||
| ||
Network |
| |
Protocols |
| |
TCP/IP |
| |
RAPP, BOOTP, DHCP |
| |
IP Address, Subnet Mask, Default Gateway |
| |
Primary DNS, Secondary DNS |
| |
NetWare |
| |
AppleTalk |
| |
NetBEUI |
| |
Frame Types |
|
T.37 Option Guide: English 53