Domain Name

User Function 91

This function is only used when setting up your fax machine as a gateway for relay fax. This is also known as an off-ramp.

This setting is required when forwarding e-mail received by SMTP to PSTN/ISDN.

Data is received only from the registered (programmed) domain names.

Example

If you register network.com, only the e-mail from domain network.com or its sub-domain will be received and forwarded.

!Domain Name (User Function 91), is only used when setting up your fax machine as a gateway for relay fax.

Domain Name Restrictions

·Up to five (5) domain names may be registered.

·Each domain name may be up to 64-characters long.

·When a SMTP reception request is received, the e-mail will be received only if the sender’s domain name matches one of the registered domain names. If there is no match, your fax machine assumes that the e-mail cannot be received. Reception does not occur.

·You may use Latin letters, numbers and symbols while registering the domain name.

To enter symbols, use either one-touch key 20 or key “0” of the numeric ten-key pad.

The symbols that can be used are:

! # & ’ ( ) * + , - . / : ; = ? · @ ? ” _ % ~

The “~” (tilde) symbol will appear on the display as -1”.

Both uppercase and lowercase letters can be used.

To change the case, press the CAPS key (one-touch key 31).

T.37 Option Guide: English 33

Page 33
Image 33
Oki 5780 manual Domain Name User Function, Example, Domain Name Restrictions