Omega Vehicle Security OM-550 manual Printer Window, To remove the Viewing Window

2.1.4 PRINTER WINDOW

The OM-550 has a protective viewing window that can be removed to clear paper jams, or to allow closer inspection of the print head & paper path.

To remove the Viewing Window:

1.Lift under the bottom edge to a 45-degree angle, then pull it away from the case, as shown in Figure 2-10:

Figure 2-10

2.Replace the window by reversing the removal sequence making sure the tabs click into place.

The window material is very durable but may be scratched by abrasives. For best service, clean it regularly with mild soap and a soft cloth. Avoid solvents and harsh abrasives that might scratch the viewing area or interfere with the mechanical operation of the printer head.

OM-550 u9u