Omega Vehicle Security OM-550 manual Thermal Paper, Battery Cover, DC Jack, Serial Data Port

2.1.5 THERMAL PAPER

Two thermal paper rolls are supplied for printing logged and programming data. The paper is placed on the paper bail with the active side of the paper-inserted face down into the rear paper feed slot. Refer to section 3.2 PAPER INSTALLATION for more information.

2.1.6 BATTERY COVER

Four AA Batteries are supplied in the kit that must be installed prior to operation. The Battery cover is located on the bottom side of the OM-550. To remove it simply slide it toward the thermal paper roll (refer to section 3.1.1 BATTERY INSTALLATION for more information).

2.1.7 DC JACK

Omega offers an optional AC Power Adapter and a DC Power Cable designed to extend battery life. Both of these items are inserted into the DC Jack and then to the proper power source (refer to section 3.1.2 CONNECTING THE AC POWER ADAPTER and 3.1.3 CONNECTING THE DC POWER CABLE for more information).

2.1.8 SERIAL DATA PORT

The RS-232 Port transfers the logged data to a PC. The port uses a telephone-style 4P4C connector, shown in Figure 2-11:

SERIAL DATA PORT

Figure 2-11

OM-550 u10u