Omega Vehicle Security OM-550 manual ∙ Exiting CAL Mode, To return to normal operation

∙EXITING CAL MODE

When calibration is complete, the unit is still in the CAL mode (it is ignoring the cold junction compensation).

To return to normal operation:

∙Press PROG on the keypad to enter the programming mode, then use the OK key to step down through the menu to the Calibration prompt, and then answer

NO.

Figure 6-1

OR

∙Turn the unit “OFF” (and back “ON” if desired).

OR

∙Perform a Manual Reset.

OM-550 u48u