4.15 UNIT LABELS
Each channel includes a character Unit label. The Unit label is assigned during programming and printed with the data for that channel during logging.
All Temperature channels use one, common label (°C or °F). Refer to section 4.10 TEMPERATURE UNITS for more information.
Each Voltage channel may be programmed with an individual Unit label and every available label has an associated number.
When prompted for a Units label during programming, enter the corresponding number to assign the Unit or press "99" to see a list of the labels and their associated numbers, as below:
PRESS 99
THE LIST PRINTS.
NOTE THAT THE 00=”BLANK”
THE PROMPT REPEATS
THE SELECTION IS ECHOED
Figure
This list is always available from the Keypad but many operators prefer to print it and save the printout to avoid the delay while it reprints.
u39u |
