Panasonic AJ-HPX3100G When CAC FILE does not operate properly, ◆ Notes

If the following messages are displayed when the JOG dial button is pressed, the data cannot be deleted.

Error message	Measures
DELETE NG	Insert an SD memory card.
NO CARD
(No SD memory card is inserted)
DELETE NG	It is assumed that the SD
ERROR	memory card is defective.
(Data cannot be deleted)	Replace the card.
DELETE NG	Eject the SD memory card and
WRITE PROTECT	release write protection.
(The SD card is write protected)
DELETE NG	It is impossible to access the SD
CANNOT ACCESS	memory card while the card is in
(It is impossible to access the	use. After completion of the
data)	respective operations, perform
	the read operation again.
DELETE NG	Select the FILE NO. containing
NO FILE	astigmatism files and perform
(No file is available)	the delete operation.

7 Move the arrow (cursor) to YES by turning the JOG dial button and then press the JOG dial button.

When the write operation is completed, the following message is displayed.

When CAC FILE does not operate properly

The following error messages are displayed in the viewfinder when CAC does not operate properly or CAC files cannot be read properly.

Error message	Meanings	Measures
	When the CAC FILE is	Read the CAC FILE in
	read from the SD	a mode other than
FILE MEMORY	memory card to	EMPTY mode.
FULL	memory in the unit in
	EMPTY mode, the
	built-in memory is full.
	When the CAC	Read the CAC FILE
	function is set to ON	that is applicable for
	and no CAC FILE	the lens to be used.	Adjustments
CAC FILE DATA	applicable to the
	connected lens is
NOT FOUND
	available. This is
	displayed when the
	power of the unit is		and
	turned on.
	When the unit cannot	This lens does not	Settings
	respond to the return	support CAC
CAC LENS DATA	data from the lens, or	correction. Although it
	when any responses	cannot execute CAC	for
INVALID	other than ones as	correction, using this
			Recording
	defined in the CAC	lens presents no
	FILE are returned.	problems.
	Initialization of the lens	Turn the focus/zoom
LENS INITIALIZE	position detection	ring to through the
NOT	(focus/zoom) in the	intermediate point of
COMPLETED	encoder type is not	the operation range.
	completed yet.

DELETE OK	◆ Notes
	z When lens optical accessories (converter lens, attachment)
	are installed, the CAC may not operate properly due to
	changes in the optical characteristics of the lens. In this
	case, turn off the CAC function.
	z When focus support is used with CANON lenses, data must
	be recorded after initialization in the automatic initialization
	mode. The state where the focus ring is moving may be
	recorded.
	z When the CAC does not operate and no error message is
	displayed, the version of the software for the lens may be out
	of date and invalid. Please contact the lens manufacturer.

Adjustments and Settings for Recording : Chromatic Aberration Compensation (CAC) 107