Thumbnail Screen

Press the THUMBNAIL button to display the thumbnail screen on the LCD monitor. Pressing the THUMBNAIL button again returns the display to the regular display. When switching is done from the regular screen display to the thumbnail screen display, all the clips will be displayed on the thumbnail screen.

Pressing the MENU button allows you to navigate the thumbnail menu.

‹Note

When the TCG switch is set to [SET] to set the time code and user bits or when the camera menu is open, the THUMBNAIL button does not work.

2

1

16



3

4

5

6

7

Thumbnail screen

9 10

8

11 12 13 14 15

1.Display Mode

The type of the thumbnail indicated on the display and the types of the other information screens are indicated.

ALL: Display all clips.

SAME FORMAT:

Clips in the same format as the system format (SYSTEM MODE item, REC FORMAT item, AUDIO SMPL RES item) are shown.

>[Selecting a recording signal and method] (page 47)

SELECT:The clips selected with the SET button are shown.

MARKER: Display clips with shot marks.

TEXT MEMO:

Display clips with text memo data. SLOT n: Display clips in the specified P2 card.

(n: 1 or 2, which indicates Slots 1 or 2.)

UPDATING..:

Indicated when the camera-recorder is updating the screen or reading data. When the screen is being updated, the rotating icon

is indicated.

>[Switching the Thumbnail Display] (page 122)

2.Slot numbers and HDD status

This section indicates on which P2 card the pointed clip is recorded. The number of the slot that contains the appropriate P2 card is indicated in yellow. If the clip is recorded on more than one P2 card, then the numbers of all slots that contain the appropriate cards are indicated. The numbers of the other slots are shown in white if they contain P2 cards.

When the following P2 card is inserted, the slot number is displayed with a pink frame.

z RUN DOWN CARD

(A P2 card on which the maximum number of overwrites has been exceeded.)

z DIR ENTRY NG CARD

(A P2 card on which the directory structure is not supported.)

The USB HDD section is indicated as follows: z Other than the USB HOST mode: gray

z Not connected in USB HOST mode: gray

z HDD recognized and usable in USB HOST mode: white

z HDD recognized and thumbnails shown in USB HOST mode: yellow

z HDD recognized and not usable in USB HOST: red

3.Time Display

You can set this to display the time code at the start of clip recording (TC), the user bits at the start of clip recording (UB), the shooting time (TIME), the shooting date (DATE), the shooting time date and time (DATE TIME), or the user clip name (USER CLIP NAME).

4.Recording mode

The recording mode for the clip on which the pointer is located is indicated.

5.System format

The format for the clip on which the pointer is located is indicated.

6.Duration

The duration of the clip on which the pointer is located is indicated.

7.USB HOST mode indicator

Indicated when the mode has been switched to USB HOST.

Thumbnails with Clips Manipulating

Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview 119