Resetting Menu Option Settings to Defaults

The menu settings can be reset to their defaults.

To reset the settings to their defaults, select the menu option

< INITIALIZE >

# READ FACTORY DATA

READ FACTORY DATA in the <INITIALIZE> screen, which

WRITE USER DATA

is accessible from the FILE page.

 

All settings will be reset to their defaults.

 

‹Note

This operation does not delete the scene file, lens file, and the information stored as the user data.

Lens file

The built-in memory of the unit stores eight sets of lens files.

z Title name

On the SD memory card, eight titles for eight sets of lens

z White shading correction value

files in a table (total 64 sets) can be written.

z Flare compensation value

The following data are recorded on the lens file.

z RB gain offset correction value

 

 

 

 

 

 

How to provide lens files

 

 

 

 

Adjustment of white shading

 

 

Adjustment of gain offset

 

 

 

 

 

 

 

 

For the white shading adjustment, refer to [Adjusting the

For correcting changes in white balance that may occur

Lens White Shading] (page 112)

when replacing the lens.

Recording for Settings and Adjustments

Adjustment of the flare

Using the menu operations, adjust the flare in the LENS R FLARE item, the LENS G FLARE item and the LENS B FLARE item. These menu items are found in the <LENS FILE ADJ> screen on the MAINTENANCE page.

#< LENS FILE ADJ >

LENS FILE ADJ MODE:ON

LENS R GAIN OFFSET:+000

LENS B GAIN OFFSET:+000

LENS R FLARE

:000

LENS G FLARE

:000

LENS B FLARE

:000

Example of the chart for flare adjustment

H

0.1H

0.1W

W

1 Mount the lens to memory the lens file on the unit.

2 Shoot the grayscale chart with appropriate lighting (2000 lx, 3200 K are preferable).

3 Set the WHITE BAL switch to the “A” position.

4 Adjust the lens aperture so that the white window at the center of the grayscale chart is about 80%.

5 Push the AUTO W/B BAL switch to “AWB” to adjust the white balance automatically.

6 Measure the signal level of RGB by using the waveform monitor (WFM).

7 Adjust the lens aperture so that the signal level of Gch is the same signal level as the one obtained in 6 above.

8 Set the LENS FILE ADJ MODE to ON.

The menu item LENS FILE ADJ MODE is found in the <LENS FILE ADJ> screen on the MAINTENANCE page.

9 Adjust the signal level of Rch to be the same as Gch in the LENS R GAIN OFFSET item.

10 In the same way, adjust the signal level of Bch to be the same as Gch in the LENS B GAIN OFFSET item.

Adjustments and Settings for Recording : Handling data 99