Panasonic AJ-HPX3100G Card Warning Code, Warning and Error Display for Thumbnail Operation and USB HOST MODE

Card Warning Code

Code No.	Description	Recording	Indication in display
			window
	The directory structure on the P2 card is not	Operation continues. However, back up data
E-70	supported. ([DIR NG CARD (Slot No.)] is	on the P2 card as soon as possible, and format	A warning code blinks once
	indicated on the viewfinder.)	the card before using it again.	every 2 seconds on the time
	The maximum number of overwrites on the P2	Operation continues. However, recording or
			code display section of the
	card has been exceeded. ([RUN DOWN CARD	playback may not operate correctly. It is
E-71			display window.
	(Slot No.)] is indicated on the viewfinder.)	recommended that you replace the P2 card
		with another one.

Warning and Error Display for Thumbnail Operation and USB HOST MODE

Item	Message		Description	Measure
	CANNOT ACCESS!	Data cannot be accessed because it is		Restore media and clips to normal state before
		corrupted or for other reasons.		access.
	CANNOT CHANGE!	With the AVC-Intra100 or AVC-Intra50, clips		Please set the SYSTEM MODE item to match the
		for which thumbnails cannot be created, and		clip. The menu item SYSTEM MODE is found in the
		for which the	mark is displayed cannot	<SYSTEM MODE> screen on the SYSTEM
		have the thumbnail for their text memo		SETTING page.
		position changed.
	CANNOT COPY!	Images cannot be copied.		Check the conditions for copying.
	CANNOT DELETE !	Contents version mismatch prevents deletion.		Match devices and contents version.
	CANNOT FORMAT!	P2 card problem prevents formatting.		Check P2 card.
	CANNOT RE-	A clip that does not span multiple cannot be		Check selected content.
	CONNECT!	reconnected.
	CANNOT REPAIR!	Data cannot be repaired since content that		Check selected content.
		cannot be repaired is selected.
	LACK OF REC	There is not enough recording capacity left on		Insert a card with sufficient recording capacity.
	CAPACITY!	the card.
	MISSING CLIP!	A shot mark will be added to the clips recorded		Insert all P2 cards with recorded clips, and confirm
		on multiple P2 cards when all P2 cards are not		that the incomplete clip indicators disappear, and
Thumbnails		inserted yet.		then add shot marks.
	NO CARD!	No P2 or SD card is inserted.		Insert compatible media.
	NO COPY TO SAME	A clip cannot be copied to the card storing the		Copy the selected clip to a card that does not
	CARD!	original clip.		contain the original clip.
	NO FILE!	The designated file is not found.		Check the file.
	SAME CLIP IS	Images cannot be copied since the clip has		Confirm the selected clip and release either the
	SELECTED!			source clip or the destination clip and then execute
		already been copied from the original clip.
				the copy operation.
	TOO MANY CLIPS!	Too many clips are selected.		Reduce the number of selected clips.
	UNKNOWN	Warning displayed to indicate contents version
	CONTENTS			Match devices and contents version.
	FORMAT!	mismatch.
	UNKNOWN DATA!	The metadata character code is invalid.		Use UTF-8 for the metadata character code. Use
				the viewer to enter correct characters.
	USER CLIP NAME	Characters in the clip name had to be deleted		The user clip name plus the counter value can only
	MODIFIED!	in adding the counter value.		contain up to 100 bytes. Characters in the clip name
				are automatically deleted when the total exceeds
				100 bytes.
	WRITE	The P2 or SD card is write protected.		Insert write-enabled media.
	PROTECTED!
	CANNOT CHANGE!	[PERSON] will be entered while the text		Enter [TEXT] before entering [PERSON].
Soft		memo is not available.
keyboard
	CANNOT SET!	The entered value is incorrect.		Change the value.
	INVALID VALUE!

156 Maintenance and Inspections: Warning System