Panasonic AJ-HPX3100G VF MARKER, VF USER BOX

VF MARKER

	Items/				Adjustable			Remarks
Data Saved					Range
TABLE					A	Select the VF MARKER setting table.
					B	First, select table A or B, then set the
–	C	U	F	R		items below for each table.
CENTER					OFF	Switch the center mark.
MARK					1	OFF: Do not display center mark.
					2	1:	+ (large)
					3	2:	Hollow (large)
					4	3:	+ (small)
						4:	Hollow (small)
–	C	U	F	R
SAFETY					OFF	Select the frame type for the safety zone
MARK					1	marker.
					2	OFF: Do not display frame.
						1:	Box
						2:
							Corner frame
–	C	U	F	R
SAFETY AREA					80%	For setting the size of the safety zone
					:	marker.
					90%	It is possible to set the size by units of 1%
					:
						with a fixed ratio between of width and
					100%
–	C	U	F	R		height.
FRAME MARK					ON	Set the frame marker to ON or OFF.
					OFF
–	C	U	F	R
FRAME SIG					4:3	Set the frame marker.
					13:9	The VISTA ratio is 16:8.65. (1.85:1)
					14:9	The CNSCO ratio is 16:6.81 (2.35:1).
					VISTA
–	C	U	F	R	CNSCO
FRAME LVL					0	Set the level outside the frame marker.
					:	0: Equivalent to signal OFF. （Blanking
					15		status）
						15: Same brightness as center area.
–	C	U	F	R

VF USER BOX

	Items/				Adjustable	Remarks
Data Saved					Range
USER BOX					ON	For setting whether the user box is
					OFF	displayed in the viewfinder or not.
–	C	U	F	R
USER BOX					001	For setting the horizontal width of the
WIDTH					:	user box.
					013
					:
–	C	U	F	R	100
USER BOX					001	For setting the vertical height of the user
HEIGHT					:	box.
					013
					:
–	C	U	F	R	100
USER BOX H					–50	For setting the horizontal position of the
POS					:	user box center.
					+00
					:
–	C	U	F	R	+50
USER BOX V					–50	For setting the vertical position of the user
POS					:	box center.
					+00
					:
–	C	U	F	R	+50

zThe user box can be displayed in any position as a boxtype cursor.

178 Menu: Menu Description Tables