Panasonic AJ-HPX3100G Status, Indication, Information Item

	Information Item	Indication	Status
1.	System mode	1080-59.9i	This indicates the mode that the unit operates in.
			1080-59.94 interlace mode
		1080-50i	1080-50 interlace mode
		480-59.9i	480-59.94 interlace mode
		576-50i	576-50 interlace mode
2.	Camera mode		This indicates the video system when signals output from CCD are recorded
		60i	on a P2 card or output as video signals.
			1080-59.94i or 480-59.94i
		30P	1080-29.97P or 480-29.97P
		24P	1080-23.98P or 480-23.98P (2-3 Pull-down)
		24PA	1080-23.98P or 480-23.98P (2-3-3-2 Pull-down)
		50i	1080-50i or 576-50i
		25P	1080-25P or 576-25P
			‹Note
			In AVC-Intra format, it becomes Native recording for 30P, 24P, and 25P.	Adjustments
3.	REC FORMAT	AVC-I 100	This indicates the recording mode.
		AVC-I 50
		DVCPRO HD
		DVCPRO50		and
		DVCPRO
		DV		Settings
4.	Shutter speed/mode	11/¢¢.¢/1¢¢¢.¢d	This indicates that the shutter speed is set to SYNCHRO SCAN.
		1/60 (1/100) - 1/2000, HALF,	This indicates that a fixed shutter speed has been set.
		¢¢¢.¢d		for
5.	P2 card remaining	¢¢¢min	The indication “¢¢¢min” stays illuminated under normal conditions or blinks
				Recording
	free space	END	when the remaining level is near zero.
			When the card space is used up, “END” blinks.
		WP	The P2 card is write-protected.
		LOOP	The camera-recorder is in LOOP REC mode. When loop recording cannot be
			performed, for example because the P2 card has no free space, the indication
		INFO P2	blinks.
			P2 card being recognised.
		¢/¢	Total free space/capacities of the P2 cards (when MODE CHECK is being
			performed).
			‹Note
			When the menu item P2 CARD REMAIN is set to “ONE CARD”, the number of
			the P2 card slot that contains the target card is indicated, together with the
			remaining space. The menu item P2 CARD REMAIN is found in the <VF
			INDICATOR> screen on the VF page.
			> [P2 Card Remaining Free Space/capacity Indication] (page 83).
6.	P2 card remaining	[1]¢¢¢min	The number of the P2 card slot that contains the target card and the remaining
	free space		free space (when MODE CHECK is being performed) are indicated. This item
	(MODE CHECK)		displays the estimated recording time (Refer to [Loop Recording] (page 39))
			when in LOOP REC mode. This indication also appears when the target P2
			card has been switched with a user button.
7.	Camera-recorder REC	REC	This is displayed when the menu item REC TALLY of the is set to “CHAR”.
	indication		The menu item REC TALLY is found in the <OPTION MODE> screen on the
			SYSTEM SETTING page.
			This is displayed when the menu item REC STATUS is set to “ON”. The
			menu item REC TALLY is found in the <VF INDICATOR> screen on the VF
			page.
8.	Battery type	DIONIC90 - AC ADPT	Battery type, selected through a menu option. “AC ADPT” indicates when an
	(MODE CHECK)		external DC power supply has been input.
9.	Battery remaining	¢¢.¢V	Battery remaining level in tenths of a volt
	level/voltage	¢¢¢%	The remaining battery level is indicated in percentage.
		EMP	This indicates that the battery level is empty.
		MAX	This indicates the battery is fully charged.

Adjustments and Settings for Recording : Viewfinder Screen Status Displays 77