Connection of the remote control unit

(AJ-RC10G)

It is possible to control some of the functions remotely by connecting the remote control unit AJ-RC10G (optional accessory).

When AJ-RC10G is connected to the REMOTE connector on the unit and the power switches of both of the unit and AJ-RC10G are turned on, the unit automatically enters the remote control mode.

The remote control mode is released when AJ-RC10G is removed or the power for the AJ-RC10G is turned OFF.

Switch functions in the remote control mode

In the remote control mode, the following switches and buttons on the unit are disabled.

zSHUTTER switch

zMENU button

zJOG dial button

zGAIN switch

zOUTPUT/AUTO KNEE switch

zWHITE BAL switch

zUSER MAIN button

zUSER 1 button

zUSER 2 button

Recording and playback Operations in the remote control mode

When the remote control is connected, recording and playback can be controlled through both the camera- recorder and the AJ-RC10G.

‹Notes

zThe state that was adjusted by connecting AJ-RC10G is stored in the unit. Not to store the adjusted state in the unit, open the FUNCTION MENU of AJ-RC10G to set the RC DATA SAVE item to “OFF”.

zWhen the dedicated cable is connected or removed, ensure that the POWER switches on both the main unit and AJ- RC10G are turned “OFF”.

zFor software of the AJ-RC10G, use Version 1.20 or higher.

zFor instructions on updating of the AJ-RC10G, refer to the support page on the following website.

http://pro-av.panasonic.net/

Dedicated cable

AJ-RC10G

REMOTE connector

Notes for the remote control unit

When this unit and AJ-RC10G are connected, the following functions differ from those described in the operating instructions that accompany AJ-RC10G.

A. KNEE ON button

When “DRS” has been selected in the AUTO KNEE SW menu option of this unit, this button can be used to switch DRS on/off. This button is lit when DRS is on and not lit when DRS is off.

The menu option AUTO KNEE SW can be found in the <SW MODE> screen on the CAM OPERATION page.

CHARA ON button

This button is used to select whether to superimpose characters on the video signal output to the MON OUT connector of this unit. Note that the MON OUT CHARACTER switch of this unit does not function when the AJ-RC10G is connected.

Scene file

Scene files created on other types of device cannot be read. When an attempt is made to read such a file, AJ- RC10G displays “NG” on the liquid crystal screen.

device external with Connection

Connection with external device: Connection of the remote control unit (AJ-RC10G) 143