Panasonic AJ-HPX3100G manual 78

Information Item	Indication		Status
10. GAIN switch	LOW/MID/HIGH		Value set for the master gain
assignment		–6 to 30	Example: LOW: 0
information (during	S.GAIN	30/36/42	Gain value to which S.GAIN and DS.GAIN are assigned
MODE CHECK)	DS.GAIN	6:/10:/12:/	These are displayed only during MODE CHCK.
		15:/20:/24:/
		28:/34:
11. Camera Warning and	AWB A ACTIVE		AWB being performed on Ch A.
Report Area	AWB B ACTIVE		AWB being performed on Ch B.
(related to AWB, ABB	AWB A OK ¢.¢K		AWB successful on Ch A.
and switch settings)	AWB B OK ¢.¢K		AWB successful on Ch B.
	AWB BREAK ¢.¢K		AWB action aborted by user.
	AWB NG		AWB action failed. The second line indicates the status.
	COLOR TEMP LOW		Color temperature too low.
	COLOR TEMP HIGH		Color temperature too high.
	LEVEL OVER		Brightness too high.
	LOW LIGHT		Brightness too low.
	TIME OVER		Action timed-out.
	ATW MODE		This is indicated when AWB cannot be executed since ATW is being
	AWB PRESET ¢.¢K		operated.
			AWB cannot operate because the WHITE BAL switch is set to PRST.
	AWB UNABLE		AWB cannot operate. The status is displayed on the second line.
	S.GAIN MODE		Super gain is operating.
	CHECK FILTER		Recheck the location of the filter switching tab when turning the power on and
	ABB ACTIVE		operating AWB.
			ABB being performed.
	ABB OK		ABB action successful.
	ABB BREAK		ABB action aborted by user.
	ABB NG		ABB action failed.
	B-SHD READY		Black shading accepted (by holding down the AUTO W/B BAL switch during
	B-SHD ACTIVE		ABB adjustment).
			Black shading being adjusted.
	B-SHD OK		Black shading adjustment successful.
	B-SHD BREAK		Black shading adjustment aborted by user.
	B-SHD NG		Black shading adjustment failed.
(Switch changeover	WHITE: #		The WHITE BAL switch has been switched. # is replaced with A, B or PRST.
indication)	¢.¢K		The set color temperature.
	ATW MODE		ATW is set.
	AUTO KNEE: ON/OFF		Displayed when the OUTPUT/AUTO KNEE switch is assigned to ON or OFF
			and the AUTO KNEE switch is turned ON/OFF.
	DRS: ON/OFF		Displayed when the OUTPUT/AUTO KNEE switch is assigned to DRS and
			the AUTO KNEE switch is turned ON/OFF.
	GAIN:¢¢dB+¢¢:		Gain has been switched with the GAIN selector switch or a user button. When
	SS: 1/¢¢¢¢ or ¢¢¢.¢deg		DS GAIN is operating, the value is also displayed.
			When the shutter speed has been switched, the shutter speed is indicated.
	SS: 1 1/¢¢¢¢ or 1¢¢¢.¢d		Shutter speed is in SYNCHRO SCAN mode.
	CC: ¢¢¢¢ ¢¢K		This appears when the CC filter setting has been selected.
	ND: ¢		This appears when the ND filter setting has been selected.
	EXTENDER: ON/OFF		Lens extender has been turned on or off.
	IRIS: ¢¢ F ¢.¢		Indicated when the iris override correction value is to be changed.
(Low light warning)	LOW LIGHT		Brightness too low.

78 Adjustments and Settings for Recording : Viewfinder Screen Status Displays