Mounting the Battery and Setting the Battery Type

Using an Anton/Bauer Battery PackWhen using a V-mount type battery pack
1 Mount the Anton/Bauer battery pack.1 Mount the V-mount adapter plate.

Anton/Bauer

Battery Pack

Insert the battery and slide it in the direction of the arrow.

Release lever

2 Setting the battery type.
Preparation
<For your information> Removing the battery pack

Completely push down and hold the release lever on the battery holder. Then, slide the battery pack in the opposite direction to the arrow while holding the lever down.

Select the battery type listed under BATTERY SELECT. When using another battery which cannot be selected using the BATTERY SELECT item setting, select TYPE A, TYPE B or TYPE C, and set the items that correspond to the characteristics of the battery. These menu items are found in the <BATTERY SETTING> screen on the MAIN OPERATION page.

2 Setting the battery type.

Select the battery type listed under BATTERY SELECT. The menu item BATTERY SELECT is found in the <BATTERY/P2CARD> screen on the MAIN OPERATION page.

The following Anton/Bauer batteries can be used:

•HYTRON140

•DIONIC90

•DIONIC160

‹Note

For information about the V-mount adapter plate, please contact the store where you purchased the camera- recorder.

Preparation: Power Supply 109