Panasonic AJ-HPX3100G Warning System, Warning Description Tables, 1. System Errors, 3. Battery Empty, 2. Card removal error, 4. P2 Card Fully Recorded

Warning System

Warning Description Tables

If a problem is detected immediately after the power is turned on, or during operation, this will be indicated by the WARNING lamp, lamps inside the viewfinder and a warning tone.

‹Note

The WARNING lamp has the highest priority, followed by the tally lamp, and then the warning tone. When multiple errors occur simultaneously a higher priority indication will be triggered. The [9. Low Wireless Signal Reception], however, may not be indicated, depending on the menu setting.

1. System Errors

Display window	The error code lights up.
indication
WARNING lamp	Blinks 4 times per second.
Tally lamp	Blinks 4 times per second.
Viewfinder	The SYSTEM ERROR indication and the error
	code light up.
Warning tone	Beeps continuously.
Warning	An error in the reference signal or the
description	communication.
Recording/
playback	The operation stops.
operation
Countermeasures	Please confirm [Error Codes] (page 155) and
	consult your distributor.

2. Card removal error

Display window	Error code E-30 blinks.
indication
WARNING lamp	Blinks 4 times per second.
Tally lamp	Blinks 4 times per second.
Viewfinder	The “TURN POWER OFF” indicator lights up.
Warning tone	Continues to beep.
Warning	The P2 card being accessed has been
	removed, resulting in an error in the internal
description
	memory of the camera-recorder.
Recording/
playback	Cannot be performed.
operation
	Turn off the power to the camera-recorder. If
Countermeasures	there is an error in a clip on the removed P2
	card, repair the clip.

3. Battery Empty

Display window	All 7 bar indicators for battery remaining
indication	capacity start blinking.
WARNING lamp	Lights up.	Maintenance
Warning tone	Beeps continuously.
Tally lamp	Blinks once per second.
Viewfinder	The BATT LED lights up.
		and
Warning	The battery has run out.
description		Inspections
Recording/
playback	The operation stops.
operation
Countermeasures	Replace the battery.
4. P2 Card Fully Recorded
Display window	All 7 bar indicators for remaining MEDIA
indication	capacity start blinking.
WARNING lamp	This lamp will illuminate continuously until an
	operation is made after recording.
Tally lamp	This lamp will flash 4 times every second until
	an operation is made after recording.
Viewfinder	The END indicator blinks.
Warning tone	This tone will sound continuously until an
	operation is made after recording.
Warning	The P2 cards are recorded to maximum
description	capacity.
Recording/
playback	The recording stops.
operation
Countermeasures	Delete the clips in the P2 card or insert a new
	P2 card.

Maintenance and Inspections: Warning System 153