Panasonic AJ-HPX3100G Color TV Standard Settings (Settings for frame frequency), ◆Notes, 6 Turn off the power supply once and then turn on it again

Color TV Standard Settings (Settings for frame frequency)

The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the preferred standard, refer to the procedures described below.

1 After connecting the unit to the power supply and then turning on the power, press the MENU SW button while pressing the LIGHT SW button to open OPTION MENU.

2 Turn the JOG dial button to move the cursor (arrow) to the AREA SELECT item, and the press the JOG dial button. The menu item AREA SELECT is found in the <AREA SETTING> screen on the OPTION MENU page.

*** OPTION MENU ***

OPTION

#AREA SETTING

3 Select the area among NTSC, NTSC(J), and PAL. After selecting the area by turning the JOG dial button, press the JOG dial button.

<AREA SETTING >

#AREA SELECT: PAL _AREA SET

4 Move the cursor (arrow) to _ AREA SET by turning the JOG dial button, and then press the JOG dial button. The following window appears.

AREA SET?

YES

# NO

5 Move the arrow (→) to YES and press the JOG dial button. The settings selected in Step 3 above are reflected in FACTORY and CURRENT DATA on the screen.

6 Turn off the power supply once and then turn on it again.◆Notes

zThe settings are not saved unless SET is executed even if NTSC, NTSC(J), or PAL is selected in the AREA SELECT.

zWhen AREA SELECT is revised, the “_ AREA SET” blinks.

zWhen these items are set when the unit is used for the first time, only the following 11 items are revised. When the other settings of the unit are set in MAIN MENU, the MENU setting values for items other than the following 8 are ones that were set at the factory.

	Factory	NTSC	NTSC(J)	PAL
	settings
SYSTEM	1080-	1080-	1080-	1080-50i
MODE	59.94i	59.94i	59.94i
REC FORMAT	AVC-I 100/	AVC-I 100/	AVC-I 100/	AVC-I 100/
	60i	60i	60i	50i
CAMERA	60i	60i	60i	50i
MODE
SET UP *1	7.5%A	7.5%A	0%	0%
SET UP (D/C)	7.5%	7.5%	0%	0%
*2
REAR LINE IN	+4dB	+4dB	+4dB	0dB
LVL
AUDIO OUT	+4dB	+4dB	+4dB	0dB
LVL
HEAD ROOM	20dB	20dB	20dB	18dB
GUI metadata	American	American	Japanese/	American
language	English	English	For Japan	English
indication
LANGUAGE	Not	Not	ENGLISH	Not
	displayed	displayed	JAPANESE	displayed
DATE	MDY	MDY	YMD	DMY
FORMAT *3

*1 SET UP of the SYSTEM MODE menu (Enabled only for 480-59.94i)

*2 SET UP of the DOWNCON SETTING menu (Enabled only for 1080-59.94i)

*3 Select THUMBNAIL > SETUP > DATE FORMAT from the thumbnail menu.

>[Setting the Thumbnail Display Mode] (page 132).

14 General: Color TV Standard Settings (Settings for frame frequency)