Panasonic AJ-HPX3100G Error Codes, 13. FAN STOP, 12. P2 Card Error, 11. P2 Card Nearly Full

11. P2 Card Nearly Full

Display window	One of the bars for remaining MEDIA capacity
indication	starts blinking.
WARNING lamp	Blinks once per second while recording
	continues.
Tally lamp	Blinks once per second while recording
	continues.
Viewfinder	The P2 card remaining capacity indicator blinks.
Warning tone	Beeps once per second while recording
	continues.
Warning	The total remaining capacity of all the P2
description	cards is two minutes or less.
Recording/
playback	Continues to operate.
operation
Countermeasures	Replace the cards. If there is an empty card
	slot, insert a new card.

12. P2 Card Error

Display window	Displays “00:00:00:11” in the time code
	display. The window continues to flash until
indication	the next operation, even after stopping record
	and playback.
	If the error occurs during recording, the lamp
WARNING lamp	flashes four times per second for a period of
	about three seconds. The lamp does not light
	if the error occurs during playback.
	If the error occurs during recording, the lamp
Tally lamp	flashes four times per second for a period of
	about three seconds. The lamp does not light
	if the error occurs during playback.
	A flashing “CARD ERR ¢” appears. In the actual
Viewfinder	indication the ¢ is replaced by the slot number of
	the P2 card that triggered the error.
	If the error occurs during recording, the tone
Warning tone	sounds four times per second for a period of
	about three seconds. The tone does not
	sound if the error occurs during playback.
Warning	An error has occurred while recording data to
description	or playing data from a P2 card.
Recording/	Stop recording or playback. After recording is
playback	stopped, the P2 card where error occurs is
operation	write protected.
Countermeasures	Replace the affected P2 card.

13. FAN STOP

Display window	No display.
indication
WARNING lamp	Blinks 4 times per second.
Tally lamp	No display.
Viewfinder	The FAN STOP indicator blinks while
	recording continues.
Warning tone	It does not sound.
	The fan is at rest because something is wrong
Warning	with it. Alternatively, the FAN MODE item is
	set to “OFF”. The menu item FAN MODE is
description
	found in the <OPTION> screen on the
	OPTION MENU page.
Recording/	If the camera-recorder operates with the fan
	stopped, then the temperature inside rises.
playback	While the camera-recorder continues to
operation	operate, clips may not be recorded or played
	back properly.
Countermeasures	Immediately stop using the camera-recorder	InspectionsandMaintenance
	and consult your distributor.

Error Codes

The following error codes are displayed in the display window if an error occurs in the camera:

Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 153) for countermeasures.

Code No.	Description		Type of warnings
E-11	Video initialisation error	1. System Errors
E-27	Recording control error	1. System Errors
E-30	P2 card removal error	2.	Card removal error
E-34	LCD microcontroller error	1. System Errors
E-38	P2 streaming microcontroller error	1. System Errors
E-3F	Microprocessor error in the camera control circuit.	1. System Errors
E-40	Image sequence, GENLOCK input signal or SDI input signal error	5. Image Sequence Error, 6. Corruption of Standard Signal
E-63	Something is wrong with the system control microprocessor.	1. System Errors
E-6F	Reference signal error.	1. System Errors
00:00:00:11	Errors such as recording to P2 card error	7. Recording Error, 8. Number of Clips Exceeded,
		12. P2 Card Error

Maintenance and Inspections: Warning System 155