4 With the pointer located in the lower part, move the pointer to the desired text memo number using the cursor right and left buttons ("!). Then, press the PLAY button.

zPlayback will start from the time code position of the text memo where the pointer is located. If the STOP button is pressed during playback or the playback has finished at the end of the clip, then the thumbnail screen appears again with the pointer replaced with the text memo where the playback started.

zWhile holding down the SHIFT button, use the cursor buttons up/down (#/$) to move the pointer to the first or last text memos.

zPress the THUMBNAIL MENU button to select EXIT or press the EXIT button to return the pointer to the upper part of the thumbnail screen.

‹Note

zPressing the REC button in the text memo screen will not start recording.

zFor AVC-Intra format clips that cannot be played back, text memo thumbnails cannot be displayed, and may be shown as a icon.

Deleting a text memo

1 Select the desired text memo by carrying out steps 1-3for [Playing back a clip at the position where a text memo is recorded] (page 124).

2 Move the pointer to the desired text memo, and then press the SET button.

3 Press the THUMBNAIL MENU button to select OPERATION > DELETE from the thumbnail menu.

YES and NO appear to confirm deletion. Use the cursor buttons and the SET button to select YES.

The text memo is deleted.

Using a text memo to break a clip and copy the necessary portion

1 Select a desired text memo in a clip by carrying out steps 1-3for [Playing back a clip at the position where a text memo is recorded] (page 124).

2 Move the pointer to the desired text memo, and then press the SET button.

You can select more than one text memo.

3 Press the THUMBNAIL MENU button to selectOPERATION > COPY.

4 User the cursor buttons and SET buttons to select the destination slot. Then, select YES

zCopying starts.

zThe portion between the selected text memo and the next one is copied.

If no text memo is found after the selected one, then all part after the selected text memo is copied.

zIf multiple text memos are selected, the selected sections are copied.

zWhen the clip is being copied, the camera-recorder indicates the progress of the copy process and cancellation status. To discontinue the copy process, press the SET button. Then, a YES/NO confirmation screen is displayed. Use the cursor buttons and SET button to select YES.

‹Note

In clip division and copying using the text memo function, the area copied may be automatically modified depending on the recording format of the clip.

Thumbnails with Clips Manipulating

Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview 125