Handling data

Set data file configuration

The unit employs 6 sets for the file data area.

FACTORY data:

The area for storing factory settings.

Data cannot be revised with menu operations.

USER data:

The area for storing the data set by menu operations The FACTORY data is stored as the factory setting.

CURRENT data:

The area for storing the operating status of the unit

The set value in this area is revised by menu operations.

SCENE file:

Four sets of scene files are provided.

LENS file:

Eight sets of lens files are provided.

CAC file:

32 chromatic aberration compensation data area sets are provided.

>For menu items that can be read from or stored in the respective areas, refer to [Menu] (page 158)

‹Notes

zFor information about how to navigate through the menu for this section, see [Setting Menu Options] (page 160).

zAccess the respective data settings files after switching the PC MODE to “OFF”. If the respective data settings files are accessed when the unit is in USB DEVICE mode, an error may occur. The menu item PC MODE is found in the <SYSTEM MODE> screen on the SYSTEM SETTING page.

It is possible to write eight

SD memory card

 

 

 

 

SET UP data

 

 

 

 

setup files on the SD

 

CAC ADJ

 

 

 

 

 

 

 

memory card.

 

No. of files: 8

 

CAC FILE DELETE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu operations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To revise the set

 

SD CARD READ/WRITE

 

SD CARD READ/WRITE

 

 

 

READ

 

 

 

WRITE

 

 

 

 

value

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAC

 

 

 

 

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CURRENT data

 

 

 

 

 

(Operating status of the unit)

WRITE USER

 

READ USER

 

No. of files: 1

DATA

 

DATA

 

 

 

 

 

 

 

 

 

 

USER data

 

 

 

 

 

 

No. of files: 1

 

 

 

 

 

 

 

 

READ FACTORY

 

FACTORY data

DATA

 

 

 

 

 

 

 

 

 

(Revision disable)

 

 

 

 

 

No. of files: 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: Files built in the unit

: Menu operations

CAC FILE CARD READ

DELETE

CAC FILE CARD READ

SD memory card

READ

CAC file

No. of files: 32

SCENE

 

 

SCENE file

 

WRITE

 

 

 

 

 

 

No. of files: 4

 

 

 

 

 

SCENE

 

 

 

 

 

 

 

 

 

 

 

 

 

READ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LENS FILE

 

 

 

 

 

 

 

READ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LENS file

 

 

 

 

 

 

LENS FILE

 

 

 

 

 

 

 

WRITE

 

No. of files: 8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LENS FILE CARD R/W

 

LENS FILE CARD R/W

 

READ

 

 

 

WRITE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SD memory card

Lens file

No. of files: 8a8

It is possible to write eight titles for eight lens files on the SD memory card.

90 Adjustments and Settings for Recording : Handling data