Panasonic AJ-HPX3100G To read data on an SD memory card, To select a file number, To read data on a selected file, 7 To exit the menu, press the MENU button

14 To exit the menu, press the MENU button.

The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen.

5 Press the JOG dial button to display the following message:

‹Notes

zIt is possible to overwrite the setup file on the unit with a setup file from another device. Note that if the file is overwritten, the original setup file from the other device will be lost.

zWe recommend managing the respective SD memory cards on the respective devices independently.

READ?

YES

# NO

To read data on an SD memory card

Select the type of the menu to read from the <SD CARD R/ W SELECT> screen in advance, and then perform the reading from the SD memory card via the following procedure.

1 Navigate the menu to the <SD CARD READ/ WRITE> screen.

To select a file number

2 Turn the JOG dial button to move the cursor to the menu option R. SELECT. Then, press the dial button.

< SD CARD READ/WRITE >

# R.SELECT	1
READ
W.SELECT	1
WRITE

CARD CONFIG

TITLE READ

TITLE:

1:******** 5: ********

2:******** 6: ********

3:******** 7: ********

4:******** 8: ********

3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.

To read data on a selected file4 Turn the JOG dial button to move the cursor to the option READ.

< SD CARD READ/WRITE >

R.SELECT:1

#READ

W.SELECT:1

WRITE

CARD CONFIG

TITLE READ

TITLE:

1:******** 5: ********

2:******** 6: ********

3:******** 7: ********

4:******** 8: ********

6 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.

When the data has been read, the following message appears:

READ OK

The data will not be read if any of the following messages appears when the JOG dial button is pressed:

Error message	Remedy
READ NG	Insert an SD memory card.
NO CARD
(No SD memory card inserted.)
READ NG	The card has not been formatted
FORMAT ERROR	using the unit.
(SD memory card not properly	Replace the card.
formatted.)
READ NG	Write file data.
NO FILE
(No file found.)
READ NG	Only data written with the unit is
ERROR	readable.
(SD memory card not readable.)
READ NG	Example: The SD memory card
CANNOT ACCCESS	is not accessible because it is
(SD memory card not	being played back.
accessible.)	After the operation in process,
	read data.

7 To exit the menu, press the MENU button.

The settings menu will be replaced by status indications for the unit.

94 Adjustments and Settings for Recording : Handling data