Recording Review Function

When recording is paused, pressing the RET button automatically locates the last two seconds of video just recorded, and the viewfinder provides video playback. After playback, the camera-recorder is again ready to start recording.

The picture location/playback duration can be increased to up to 10 seconds by continuously pressing the RET button. For short clips, however, when the start of a clip is located, continuously pressing the RET button does not play back any clips before that clip.

The function of the RET button may be assigned to a desired user button by using one of the menu options USER MAIN SW, USER1 SW, USER2 SW, SHOT MARK (USER3) SW or TEXT MEMO (USER4) SW. These options can be found in the <USER SW> screen on the CAM OPERATION page.

When recording is paused, pressing the PLAY/PAUSE button plays back the last recorded clip, from the beginning. This unit enters the recording standby mode after the playback ends.

Recording starts

Recording pauses

 

 

 

 

 

 

 

 

 

 

2-10 Seconds

Recorded clip

The PLAY button plays back the clip from the beginning.

The RET button puts the camera-recorder into REC REVIEW mode.

‹Notes

zSet the menu option RET SW to “R. REVIEW”. The menu item RET SW is found in the <SW MODE> screen on the CAM OPERATION page.

zWhen the SDI OUT MODE or MONITOR OUT MODE menu option is set to “MEM”, the image of REC REVIEW is output not only to the viewfinder but also on the video output connector (SDI OUT connector, MON OUT connector) during

REC REVIEW.

Note that when a backup device is connected to back up the video the pictures for REC REVIEW are backed up. These menu items are found in the <OUTPUT SEL> screen on the SYSTEM SETTING page.

zIn ONE CLIP REC mode, the furthest rewind point using REC REVIEW and the start point for playback after pausing a recording is not at the start of the clip, but at the start of the most recent recording.

44 Recording and Playback: Recording Review Function