Panasonic AJ-HPX3100G Display Window Functions, 13 -dB, 13 -dB, 13 -dB, Memory action status indication, P2 card/battery-remaininglevel indications, BATT, LOOP, BATT, LOOP, BATT

Display Window Functions

P2 card/battery-remaining level indications

Media-remaining space indication bar

The bar indicates the remaining free space on each P2 card, using a seven-segment display.

Each segment can represent either three or five minutes of remaining free space, depending on the value set through the menu option CARD REMAIN/„. According to the set value, the segments disappear one-by-one. The menu option CARD REMAIN /„ can be found in the <BATTERY/P2CARD> screen on the MAIN OPERATION page.

NDF SLAVE HOLD W HDVGPS							OVER			OVER
								0
CTL VTCG TIME DATE P-iREC
	h Y		minM	s D	frm
								10
								20
MEDIA
		E				F		30
BATT
		E				F		40
									OO
LOOP							13 -dB			24

Battery-remaining level indication bar

For a battery with a digital indicator (percentage indication), if the remaining level of the battery is higher than 70%, all seven segments up to the “F” position are lit.

When the remaining level falls below 70%, the segments go out one-by-one for each drop of 10%. All seven segments can be set to light up when the battery-remaining balance is 100%. To do so select “100%” for the menu item BATT REMAIN FULL. The menu item BATT REMAIN FULL is found in the <BATTERY/P2CARD> screen on the MAIN OPERATION page.

Audio channel level meter

When the MONITOR SELECT CH1/2 / CH3/4 switch is set to [CH1/2], the meter indicates 1 and 2 as the audio channel numbers, together with their audio levels. When the switch is set to [CH3/4], the meter indicates 3 and 4 as the audio channel numbers, together with their audio levels.

Memory action status indicationError Code Indication

>[Warning System] (page 153)

NDF SLAVE HOLD W HDVGPS							OVER			OVER
								0
CTL VTCG TIME DATE P-iREC
	h Y		minM	s D	frm
								10
								20
MEDIA
		E				F		30
BATT
		E				F		40
									OO
LOOP							13 -dB			24

Information indication

LOOP:Stays illuminated in LOOP REC mode.

>[Loop Recording] (page 39).

Mode indication

W:Stays illuminated when the camera-recorder operates in

SD mode (480-59.94i, 576-50i) and is set to 16:9 mode.

HD: Stays illuminated when the camera-recorder is in HD mode (1080i).

DV: Stays illuminated when the recording/playback format is DV.

GPS: Stays illuminated when radio waves are not received during GPS operation.

GPS: Stays illuminated when radio waves are received during GPS operation.

P-REC:Stays illuminated when the PRE REC MODE is set to ON, and blinks when recording is continued after the recording tally lamp has gone out. The menu item PRE REC MODE is found in the <REC FUNCTION> screen on the SYSTEM SETTING page.

iREC: Remains illuminated during INTERVAL REC mode recording, and blinks during a pause.

i:Blinks when INTERVAL REC mode is selected.

NDFSLAVE HOLD W HDVGPS							OVER			OVER
								0
CTL VTCG TIME DATE P-iREC
	h Y		minM	s D	frm
								10
								20
MEDIA
		E				F		30
BATT
		E				F		40
									OO
LOOP							13 -dB			24

Time code indication

NDF: Stays illuminated when the time code is in non-drop frame mode.

DF: Stays illuminated when the time code is in drop frame mode.

SLAVE: Stays illuminated when the time code is externally locked.

HOLD: Stays illuminated when the time code generator/reader value is frozen.

CTL: Stays illuminated when the DISPLAY switch is positioned at [CTL] to display the CTL count.

TCG: Stays illuminated when the DISPLAY switch is positioned at [TC] (or [UB]) to display the TC (or UB) generator value.

TC: Stays illuminated when the DISPLAY switch is positioned at [TC] (or [UB]) to display the TC (or UB) reader value.

VTCG: Stays illuminated when the DISPLAY switch is positioned at [UB] to display the VIUB generator value.

VTC: Stays illuminated when the DISPLAY switch is positioned at [UB] to display the VIUB reader value.

TIME: Stays illuminated when the DISPLAY switch is positioned at [UB] to display the real-time hour, minute and second.

DATE: Stays illuminated when the DISPLAY switch is positioned at [UB] to display the real-time date.

No Indication:

The CTL, VTCG, TIME, and DATE stay off when the DISPLAY switch is positioned at [UB] to display real time, time zone, hour and minute.

Time count indication:

The time code, CTL, user bits and real time are shown.

‹Note

When the DISPLAY switch is positioned at UB, each press of the HOLD button changes the indication through VTCG (VTC)

>DATE > TIME > No Indication (Time Zone) > TCG (TC), in that order.

28 Parts and their Functions: Display Window Functions