Panasonic AJ-HPX3100G Displays in mode check only

Displays in mode check only

Display screens and menu options		Status when displayed
!LED screen		Displays menu options that become !LED lighting factors.
		z Indications selected through the menu option !LED are marked with [ ! ].
		z Indications which may activate the !LED are marked with [	].
	GAIN (0 dB)	Gain status
	DS.GAIN	DS. GAIN value
	SHUTTER	Shutter status
	WHITE PRE.	White balance status
	EXTENDER	Extender status (EX2 or OFF)
	B.GAMMA	BLACK GAMMA status (ON or OFF)
	MATRIX	MATRIX status (A, B, or OFF)
	COLOR COR.	Color correction status (ON or OFF)
	FILTER	Filter status
	ATW	ATW status
FUNCTION screen		Displays video output status and recording media information.
SDI OUT		Displays status of signals output from the SDI OUT connector
	OUTPUT	Displays MEM/CAM status displayed with the SDI OUT MODE menu option.
		You can select the SDI OUT MODE menu option from the <OUTPUT SEL>
		screen of the SYSTEM SETTING page.
	TYPE	Displays format of signals output from the SDI OUT connector with HD-SDI/SD-SDI.
	CHAR	Displays superimposition status of characters selected with the SDI OUT CHAR
		menu option as ON/OFF. You can select the SDI OUT CHAR menu option from
		the <OUTPUT SEL> screen of the SYSTEM SETTING page.
MON OUT		Displays status of signals output from the MON OUT connector
	OUTPUT	Displays status of MEM/CAM selected with the MONITOR OUT MODE menu
		option. The MONITOR OUT MODE item can be selected from the <OUTPUT
		SEL> screen on the SYSTEM SETTING page.
	SELECT	Displays signal format set with the MONITOR OUT menu option as HD-SDI/
		SD-SDI/VBS. The MONITOR OUT item can be selected from the <OUTPUT
		SEL> screen on the SYSTEM SETTING page.
	CHAR	Displays the position of the MON OUT CHARATER switch as ON/OFF.
P2CARD STATUS		Displays the status of a P2 card inserted into the P2 card slot, and total space
		and remaining space for recording.
		The card status is indicated as:
		ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/
		NOT SUPPORTED/FORMAT ERROR/NO CARD
		> [P2 CARD ACCESS LED and Status of P2 cards] (page 33).
	TOTAL	Displays the total space and remaining space for recording of a P2 card
		inserted into the P2 card slot 1 and 2.
	SLOT1	Displays the status of a P2 card inserted into the P2 card slot 1, and total space
		and remaining space for recording.
	SLOT2	Displays the status of a P2 card inserted into the P2 card slot 2, and total space
		and remaining space for recording.
AUDIO screen		Displays audio settings and selection status of each recording channel
SAMPLE RES		Displays the number of audio recording bits.
MIC POWER (MENU)		Displays menu setting status for power provided to the microphone.
	FRONT	Displays status of power supplied to the front microphone, selected with the FRONT
		MIC POWER menu option, as ON/OFF. You can select the FRONT MIC POWER
		menu option from the <MIC/AUDIO> screen of the MAIN OPERATION page.
	REAR	Displays whether the rear AUDIO IN connector is set to not supply power to the
		microphone with the REAR MIC POWER menu option.
		OFF: power is not supplied.
		ON: supplies power when the switch is at MIC +48 V ON.
VR SELECT		VR SELECT Displays whether the audio level adjustment knob is selected to enable
		either CH1/2 or CH3/4 with the VR SELECT menu option. You can select the VR
		SELECT menu option from the <MIC/AUDIO> screen of the MAIN OPERATION page.
LEVEL	CH1/2/3/4	Displays the recording level adjustment method selected for each channel.
		VR: manual adjustment with the adjustment knob
		MENU:manual adjustment with the menu LVL CONTROL CH# menu option
		(# is the channel number)
		AUTO:automatic adjustment
F.VR	CH1/2/3/4	Displays with ON/OFF whether the F.AUDIO LEVEL control is enabled for channels
		to which VR (manual adjustment with the adjustment knob) is selected above.
R.XLR	CH1/2/3/4	Displays with ON/OFF the selection status of the REAR XLR AUTO CH1/2 and
		REAR XLR AUTO CH3/4 menu options that automatically select rear input when a
		connector is connected to the rear AUDIO IN XLR connector. You can select each
		menu option from the <MIC/AUDIO> screen of the MAIN OPERATION page.
A. IN	CH1/2/3/4	Displays the input status of each channel as FRONT (front)/REAR (rear)/W.L. (wireless).
METER	CH1/2/3/4	Displays the recording level of each channel.

82 Adjustments and Settings for Recording : Viewfinder Screen Status Displays