Reconnection of Incomplete Clips

Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. Reconnection function generates one clip (the original, connected clip) from incomplete clips.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Use the cursor and SET button to select incomplete clips to reconnect.

Usually, thumbnails of incomplete clips (clips with marker) are displayed in line.

3 Press the THUMBNAIL MENU button and select OPERATION > RE-CONNECTION from the thumbnail menu.

When a confirmation screen asks you to confirm that you want to reconnect the clip, use a cursor button and the SET button to select YES if you want to reconnect the clip.

‹Notes

Clips that are connected as a group must be grouped together or they will be displayed as incomplete clips.

Copying Clips

Selected clips can be copied to the P2 card or SD memory card in the desired slot.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Use the cursor buttons to move the pointer to the desired clip and press the SET button.

‹Notes

If recording using the one-clip REC function in which the clip can be combined with the previous clip (when “1¢CLIP” is displayed), then copying of clips is not possible. Close the menu, hold down the STOP button for 2 seconds to end this connection, and try again.

3 Press the THUMBNAIL MENU button and select OPERATION > COPY from the thumbnail menu.

zSelect Slot 1-2 or SD memory card as the destination.

zWhen a confirmation screen asks you to confirm that you want to copy the clip, use a cursor button and the SET button to select YES if you want to copy the clip.

‹Notes

zDo not turn off the power or remove a P2 card while data is being copied. Doing so may cause the P2 card to fail. If you should accidentally perform one of the above operations, defective clips will be generated. Delete them, and then copy them again.

zWhen clips are copied to P2 cards, all the information on the clips is copied. However, when they are copied to the SD memory card *, video and sound information is not copied, only thumbnails, clip metadata, icons, Voice Memo, proxy, and real-time metadata.

zWhen there is insufficient recording capacity on the destination, the message “LACK OF REC CAPACITY!” is displayed, and copying will not proceed. When clips to be copied include some with defects, the message “CANNOT ACCESS!” is displayed, and copying will not proceed. If selected clips include any that are already recorded on the destination P2 card, copying will not proceed.

zTo interrupt copying, press the SHIFT button + EXIT button, or the SET button. Clips currently being copied to the destination will be deleted.

zWhen identical clips exist on the destination card, the “OVERWRITE?” is displayed. Select “YES” or “NO”.

*Regarding SD memory cards to be used, see <Cautions in using SD memory cards> (page 22).

Thumbnails with Clips Manipulating

Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview 127