Text Memo

During recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some point or break clips into chunks and copy the necessary portions.

Adding a text memo

Text memos can be added in one of the following ways.

zPress the TEXT MEMO button or button to which the shot mark function has been assigned (RET button of the lens) has been assigned during recording or playback.

This adds text memos where respective button was pressed.

zPressing the TEXT MEMO button or button to which the shot mark function has been assigned (RET button of the lens) when a thumbnail screen is open, adds a text memo at the beginning of a clip.

‹Note

One clip can have up to 100 text and voice memos in combination. Note that camera-recorder is not capable of adding or showing voice memos.

TEXT MEMO Button

Playing back a clip at the position where a text memo is recorded

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Press the THUMBNAIL MENU button and select THUMBNAIL > TEXT MEMO CLIPS from the thumbnail menu.

The clip thumbnails with text memos attached are displayed in the upper section of the LCD monitor. The lower section of the LCD monitor shows information about the text memo on the clip selected by the pointer.

Thumbnail

Shows the still image that the

Display

text memo is related to.

Selected text memo clips (blue) and total clips (white)

3 Move the pointer over the clip that contains the desired text memo to playback and press the SET button.

The pointer moves to the lower part of the LCD monitor.

The pointer moves down.

124 Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview