Press the JOG dial button to accept a desired character.
5 Press the JOG dial button.

This moves the cursor to the entry area, putting the unit in entry mode.

< SD CARD READ/WRITE >

R.SELECT:1

READ

W.SELECT:1

WRITE

CARD CONFIG

TITLE READ

;

TITLE:

1:******** 5: ********

2:******** 6: ********

3:******** 7: ********

4:******** 8: ********

6 Turn the JOG dial button until a desired character appears.

The characters that appear are switched in the following order:

Space:

†

Ð

 

Alphabetical characters:

A to Z

Ð

 

Numerals:

0 to 9

Ð

 

Symbols:

', >, <, /, -

7

8 Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 6 - 7 to set characters (up to eight characters).

To write data on a selected file9 When the title is set, turn the JOG dial button to move the cursor to [:].

< SD CARD READ/WRITE >

R.SELECT:1

READ

W.SELECT:1

WRITE

CARD CONFIG

TITLE READ

;

TITLE:

1:******** 5: ********

2:******** 6: ********

3:******** 7: ********

4:******** 8: ********

10 Press the JOG dial button to return the cursor to the option TITLE:.11 Turn the JOG dial button to move the cursor to the option WRITE.
12 Press the JOG dial button to display the following message:

WRITE?

YES

# NO TITLE:

The data will not be written if any of the following messages appears when the JOG dial button is pressed:

Error message

Remedy

 

 

 

 

WRITE NG

Insert an SD memory card.

NO CARD

 

(No SD memory card inserted.)

 

 

 

WRITE NG

The card has not been formatted

FORMAT ERROR

using the unit.

(SD memory card not properly

Replace the card.

formatted.)

 

 

 

WRITE NG

The card may be defective.

ERROR

Replace the card.

(SD memory card not writable.)

 

 

 

WRITE NG

Remove the card and disable

WRITE PROTECT

the protect.

(SD memory card write-

 

protected.)

 

 

 

WRITE NG

Example: The SD memory card

CANNOT ACCCESS

is not accessible because it is

(SD memory card not

being played back.

accessible.)

After the operation in process,

 

format the card.

 

 

WRITENG

The card is not writable because

CARD FULL

it has no free space. Delete

(SD memory card has no free

unwanted files or replace the

space.)

card with a new one.

 

 

13 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.

When the data has been written, the following message appears:

WRITE OK

Recording for Settings and Adjustments

Adjustments and Settings for Recording : Handling data 93