Audio (input) Function Section

15

2

12

3

9

4

11

1613 14

1.MIC IN (microphone input) jack (XLR, 5-pin)

A microphone (optional accessory) is connected here. Power for the microphone comes from this jack.

A remote microphone may be connected. When a microphone is used, set the power to ON through the menu option FRONT MIC POWER.

The menu item FRONT MIC POWER is found in the <MIC/AUDIO> screen on the MAIN OPERATION page.

>[Preparing for Audio Input] (page 114)

2.AUDIO LEVEL CH1/3 / CH2/4 (audio channel 1/ 3 / 2/4 recording level adjustment) controls

With the 3.AUDIO SELECT CH1/3 / CH2/4 (audio channel 1/3 / 2/4 automatic/manual level adjustment selector) switch positioned to [MAN], these controls can be used to adjust the recording levels for Audio Channels 1/2 (With the menu settings 3/4).

Note that the controls are designed to be locked. For adjustment, each control must be depressed while turning.

3.AUDIO SELECT CH1/3 / CH2/4 (audio channel 1/3 / 2/4 automatic/manual level adjustment selector) switch

Use this switch to select recording level control mode for Audio Channels 1/2 (With the menu settings 3/4).

AUTO: Recording level automatically controlled.

MAN: Recording level manually controlled.

8

6

1

16

5 10 7

4.AUDIO IN (audio input selector) switch

Use this switch to select the signals recorded through Audio Channels 1 - 4.

FRONT: Signal from the microphone connected to the 1.MIC IN (microphone input) jack is recorded.

W.L. (WIRELESS) :

Signal from the slot-in wireless receiver is recorded.

REAR: Signal from the audio device connected to the 5.AUDIO IN CH1/3 / CH2/4 (audio input channel 1/3 / 2/4) connectors is recorded.

‹Note

When you use stereo microphone (AJ-MC900G optional), set both CH1 and CH2 (With the menu settings CH3, CH4) to [FRONT]. The signal from L CH is recorded to CH1 (With the menu settings CH3) and that from R CH to CH2 (With the menu settings CH4).

5.AUDIO IN CH1/3 / CH2/4 (audio input channel 1/ 3 / 2/4) connectors (XLR, 3-pin)

Audio devices or a microphone may be connected here. > [When Using Audio Devices] (page 115)

6.LINE/MIC (line input/mic input) selector switch

Used to select the audio signal input from the 5.AUDIO IN CH1/3 / CH2/4 (audio input channel 1/3 / 2/4) connectors.

LINE: Audio signal line-input from the audio device is input.

MIC: Audio signal from a self-powered (active) microphone is input. (The main unit does not supply power to the remote microphone).

18 Parts and their Functions: Audio (input) Function Section