To format an SD memory card

 

4 To exit the menu, press the MENU button.

 

 

 

The settings menu disappears and the status of the unit

‹Note

 

is indicated at the top and bottom of the viewfinder

SD memory cards may be formatted via the thumbnail screen.

 

 

screen.

> [Formatting SD memory cards] (page 131).

 

1 Navigate the menu to the <SD CARD READ/ WRITE> screen.2 Turn the JOG dial button to move the cursor to the menu option CARD CONFIG.3 Press the JOG dial button.

The following message is displayed.

‹Notes

zData erased by formatting cannot be restored, so be sure to perform the format after first confirming the data.

zIf an SD memory card is inserted or removed with the <SD CARD READ/WRITE> screen open, the data title cannot be edited.

Move the cursor to the option TITLE READ and press the JOG dial button. Edit the data title.

To write set data on an SD memory card

Select the type of the menu to write to the <SD CARD R/W SELECT> screen in advance, and then perform the writing to the SD memory card via the following procedure.

CONFIG?

YES

# NO

zTo format the SD memory card, turn the JOG dial button to move the cursor to YES. Then, press the dial button.

zWhen the SD memory card has been formatted, the following message appears:

CONFIG OK

The card will not be formatted if the following message appears when the JOG dial button is pressed:

Error message

Remedy

 

 

CONFIG NG

Insert an SD memory card.

NO CARD

 

(No SD memory card inserted.)

 

 

 

CONFIG NG

The card may be defective.

ERROR

Replace the card.

(SD memory card cannot be

 

formatted.)

 

 

 

CONFIG NG

Remove the card and cancel the

WRITE PROTECT

protect.

(SD memory card is write-

 

protected.)

 

 

 

CONFIG NG

Example: The SD memory card

CANNOT ACCCESS

is not accessible because it is

(SD memory card not

being played back.

accessible).

After the operation in process,

 

format the card.

 

 

1 Navigate the menu to the <SD CARD READ/ WRITE> screen.

To select a file number

2 Turn the JOG dial button to move the cursor to the option W. SELECT. Then, press the dial button.

< SD CARD READ/WRITE >

R.SELECT

:1

READ

 

# W.SELECT

:1

WRITE

CARD CONFIG

TITLE READ

TITLE:

1:******** 5: ********

2:******** 6: ********

3:******** 7: ********

4:******** 8: ********

3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.

To give the selected file a title4 Turn the JOG dial button to move the cursor to the option TITLE:.

< SD CARD READ/WRITE >

R.SELECT:1

READ

W.SELECT:1

WRITE

CARD CONFIG

TITLE READ

#TITLE:

1:******** 5: ********

2:******** 6: ********

3:******** 7: ********

4:******** 8: ********

92 Adjustments and Settings for Recording : Handling data