8. Help
55
For assistance, please visit http://www.panasonic.com/help
LIf you replace only the toner cartridge, tap on the
used toner cartridge several times to allow the
remaining toner to fall into the drum unit before
removing.
6Turn the two levers (1) on the used toner cartridge
firmly, until the triangles (2) match.
7Remove the used cartridge (1) from the drum unit
(2).
LThe toner may stick to the cartridge and the drum
unit. Be careful when handling. See page 5 for
details.
LDo not drop the toner on the black drum surface
(3).
LPut the used toner cartridge into the protection
bag.
8Insert the cleaner (1) fully into the groove (2) of the
drum unit and move it from side to side at least 3
times to clean the inside of the drum unit.
Important:
LIf the groove of the drum unit is dirty, lines or
dirty patterns may appear on printed sheets.
Be sure to remove any toner remaining on the
inside of the drum unit to maintain the print
quality.
LRepeat for the other groove.
Note:
LBe sure to clean all the way to the edge of each
groove.
9If you replace the drum unit at the same time,
remove the new drum unit from the protection bag.
Place the new toner cartridge (1) into the drum unit
(2) vertically.
1
2
1
2
3
12
1
2
FL421-PNQX3022ZA-OI-en.book Page 55 Thursday, July 29, 2010 9:35 AM