7. Programmable Features

 

 

 

 

 

 

 

 

 

Feature/Code

Selection

 

 

Setting the toner

The unit will automatically activate for maintenance, once every 24 hours.

 

 

maintenance time

Because this is to prevent the toner from solidifying, the noise that the unit

 

 

{#}{6}{5}

makes during maintenance cannot be stopped. However, if the unit’s noise

 

 

 

bothers you, you can change the start time.

 

 

 

1. {Menu} i{#}{6}{5} i{Set}

 

 

 

2. Enter the maintenance start time.

 

 

 

L The default time is 12:00PM.

 

 

 

L Press {*} repeatedly to select AMor PM.

 

 

 

3. {Set} i{Menu}

 

 

 

 

 

 

Setting the maximum fax

{1} 14.4Kbps

 

 

speed

{2} 33.6Kbps(default)

 

 

{#}{6}{6}

Note:

 

 

 

L The fax speed maybe lower than the selected speed according to your

 

 

 

line.

 

 

 

 

 

 

Setting the Error

This feature is available when the sending/receiving fax machines are

 

 

Correction Mode (ECM)

ECM compatible.

 

 

{#}{6}{8}

{0} OFF: Deactivates this feature.

 

 

 

{1} ON(default): If there is an error during fax transmission / reception,

 

 

 

the unit will support the communication.

 

 

Setting flash time

The flash time depends on your telephone exchange or host PBX.

 

 

{#}{7}{2}

{1} 900msec

 

 

 

{2} 700msec(default)

 

 

 

{3} 600msec

 

 

 

{4} 400msec

 

 

 

{5} 300msec

 

 

 

{6} 250msec

 

 

 

{7} 200msec

 

 

 

{8} 160msec

 

 

 

{9} 110msec

 

 

 

{*} 100msec

 

 

 

{0} 90msec

 

 

 

{#} 80msec

 

 

 

Note:

 

 

 

L If the unit is connected via a PBX, PBX functions (transferring a call,

 

 

 

etc.) might not work correctly. Consult your PBX supplier for the correct

 

 

 

setting.

 

 

 

 

 

 

Setting the connecting

If you often have trouble when sending faxes, this feature allows you to

 

 

tone

hear connecting tones: fax tone, ring back tone and busy tone. You can use

 

 

{#}{7}{6}

these tones to confirm the status of the other party’s machine.

 

 

 

{0} OFF: Deactivates this feature.

 

 

 

{1} ON(default): You will hear connecting tones.

 

 

 

L If the ring back tone continues, the other party’s machine may not be a

 

 

 

fax machine or may have run out of paper. Check with the other party.

 

 

 

L The connecting tone volume cannot be adjusted.

 

 

 

 

 

 

Setting toner save feature

{0} OFF(default): Deactivates this feature.

 

 

{#}{7}{9}

{1} ON: The toner cartridge will last longer.

 

 

 

Note:

 

 

 

L This feature may lower the print quality by reducing toner consumption.

 

 

 

L This setting is valid for copying, and when the unit automatically prints

 

 

 

reports/lists.

 

 

 

L This setting is invalid for printing received faxes.

 

 

 

 

 

45

Page 45
Image 45
Panasonic KX-FL421 manual 700msec default