2

Fan the stack of paper to prevent a paper jam

and insert the paper into the paper tray.

 

● The height of the stack of the paper should not

 

exceed the upper limit on the paper tray,

 

otherwise a paper jam or multi-feed may occur.

 

● The paper should not be over the tab.

 

● If the paper is not inserted correctly, readjust

the paper or a paper jam may occur.

Correct

Incorrect

 

Stack of

 

paper

 

Paper tray

3 Move the recording paper set lever back.

Setup

Upper limit

Tab

Recording paper set lever

Preparation Initial

Note:

●Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or those used for resumes.

●Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause a paper jam.

●Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or wrinkled.

●Avoid double-sided printing.

●Do not use paper printed from this unit for double-sided printing with other copiers or printers, or a paper jam may occur.

Adding paper to the paper tray

1.Pull the recording paper set lever forward.

●The unit will beep and the following message is displayed.

Display: CHECK LEVER

2.Remove the installed paper.

3.Add paper to the removed paper and straighten it.

4.Fan the stack of paper and insert it into the paper tray.

5.Move the recording paper set lever back.

Recording paper set lever

25