Setup (PC)

Connecting to a computer

To run the Multi-Function Center software, you need the following software and hardware.

¡IBM PC 386, or higher, or compatible meeting all AT bus specifications (DX 33Mhz minimum recommended) ¡Microsoft Windows 3.1, 3.11 or Windows 95

¡Hard Disk drive with at least fourteen (14) MB of available storage ¡RS232C Serial Port

Note:

¡The unit cannot print on envelopes.

»If your PC has a 9 pin com port:

25 Pin Male

KX-FA180 or a RS232C cable (not included)

»If your PC has a 25 pin com port:

To COM port

9 Pin Female

25 Pin Male

KX-FA180 or a RS232C cable (not included)

To COM port

25 Pin Adaptor (not included)

9 Pin Female

*To order a KX-FA180, call toll free 1-800-435-7329.

The RS232C (DB9 Female/DB25 Male) serial cable can also be purchased at a computer supply store.

80