Operations
When using the
See the printer 8 digit error code below. See the scanner 8 digit code on page 105.
»Error code for “Printer not ready.”:
00
Recording paper set lever:
When this digit is “1”, the recording paper set lever is released. Push the lever back to reset (p. 24).
Paper jam near the recording paper entrance:
When this digit is “1”, the recording paper is not fed into the unit properly or has jammed near the recording paper entrance. To clear, see page 108.
Paper jam under the film cartridge or too much paper on the paper stacker:
When this digit is “1”, the recording paper jammed under the film cartridge or there is too much paper on the paper stacker. Clear the jammed paper (p. 107) or remove the printed paper.
Cover open:
When this digit is “1”, the top cover is open. Close it.
Film:
When this digit is “1”, the lmfi is empty or the film is not inserted in the cartridge correctly. Replace the film or film cartridge with a new one (p. 110) or reinsert the film correctly by referring to step 8 on page 111.
Unit overheat:
When this digit is “1”, the unit is overheated. Let the unit cool down.
104 | For Assistance, Call |
|
|