For Assistance, Call 1-800-435-7329
Blue labels
Blue gear
Tight
E. Install the film cartridge into the unit.
F. Make sure that the blue label on the cartridge matches the one on the unit.
G. Close the cover securely by pushing down on both corners.
Incorrect
Correct
C. Remove the leaflet from the unit.
D. If the film in the film cartridge is slack, tighten it by winding the bottom side gears.

Quick Start

Installation

Remove the shipping tape from the unit and stacker, and install as follows.

Shipping tape

 

Shipping tape

1

Cover

Film cartridge (See page 20.)

A.Slide the cover open lever forward.

B.The cover is under tension to improve print quality.

Pull up hard enough to open.

Cover open lever

Blue label

Bottom side gears

Leaflet

4