» Windows 3.1 or 3.11 users:
From the Program Manager, click File and select Run... .
At the command line, type “c(or d):\setup” to set the CD-ROM drive and click OK.
3 Follow the instructions on the screen until all files have been installed.
4 Remove the CD from the CD-ROM drive and click Finish to reboot your PC.
Note:
¡If other communication software which uses the serial port has been installed, the communication setting may be changed and the communication software may not function properly when the Multi-Function Center software is installed.
¡The dialog box images may differ according to applications.
81
For Windows 3.1
Start Windows 3.1/3.11/95 and close all applications.
Insert the CD into your CD-ROM drive. ¡The Welcome window will automatically
appear after 4 or 5 seconds.
If the Welcome window does not appear, follow the instructions below.
» Windows 95 users:
Click Start and select Run... .
At the command line, type “c(or d):\setup” to set the CD-ROM drive and click OK.
1
2
For Windows 95
Setup (PC) Installing the Multi-Function Center software
Center/PC | |
|
|